Specifications:
- Panel Width: 29.5 in.
- Panel Height: 6 ft.
- Overall Height: 7 ft. 3 in.
- Number of Panels: 5
- Materials: Post Weld Galvanized
Wrought Iron
- Non-Toxic Heavy Powdercoat
- Wire Gauge:12 gauge standard or
8 gauge heavy duty
- Wire Spacing:1/2 in. x 4 in. -
12g or 3/4 in. x 4 in. - 8g
- Roof: Heavy Duty 18 gauge standing
seam sheet metal
- Weight: starting at 170 lbs for
12 gauge
Description:
Our four foot diameter designer cage
is pentagon shaped and the rear corner is at 90 degrees. This allows it to snugly
fit into any walled corner, or to stand alone as shown. The actual diameter
of this unit is 3.5 ft. by 4.5 ft. The door panel may be placed on any of the
sides to fit your needs.
Although the grate, trays and casters
kit (normally added for indoor use) may be used outdoors, we recommend placing
directly on an existing slab or 25 1 ft. x 1 ft. inexpensive concrete pavers;
or if pouring a rectangular slab, the diameter needs to be 5 ft. This way you
can simply hose it off every day or two with no need to clean the bottom.
Also Available: Indoor Conversion
Kit to Bring Your Aviary Indoor. Includes Grate, Trays, & Casters. (See
accessories section)
Price includes FREE shipping.
Special
Notes about Aviary Connections Cages & Aviaries:
Wire / Bar Size:
All birds from small birds up to smaller macaws are appropriate for the 12 gage
wire cages. The largest of parrots (Moluccan & Umbrella Cockatoos, Greenwing
& Hyacinth Macaws) are recommended to be in cages with the 8 gage wire.
Ornamental Finial (decorative
ball on top): NOT included, but can be puchased here separately.
Feeding Stations:
None of these cages come standard with feeding stations/food cups. Because these
cages can be used for anything from parrots to primates to reptiles, the cups
are NOT included. The feeding stations are sold separately & are very easy
to install. In fact, unlike other cages...you can install them anywhere on the
cage thats convenient for YOU! Feeding stations can be found HERE.
Any questions? Feel free to call
or email us!